Fire Dept. Lockboxes

This box is made from 1/4 inch steel and uses a 3 point locking system with 2 stainless steel locking pins for excellent security. The lid is also receased into the box for extra security.

The box is highly recommended to be flush mounted to eliminate the possibility of smashing the box off the wall. The box can be surface mounted using 3/8 inch bolts or welded to gate posts.

The Key Deposit Tube Vault is the Fire Department's preferred lock box to be used. The key deposit housing is made from steel with the cylinder housing made from hardened steel. The vault can be installed into cement, brick or wood provided the wall is at least 6 inches thick. The vault is 1 1/2 inches in diameter and will hold up to 3 or 4 keys.

We can core into concrete.

There is also a 3" wide diameter tube vault for access cards.

We can make a cement post and install the tube vault into it for those buildings that have no existing place to install the vaults. We also have 2 extra plugs installed in the post for the building's future use.

*The Lids come in black or red*

Copyright (c) 2010 Al Scott Lock & Safe

Please note:

Safes may not be the same as shown in picture. Measurements may chance without  notice.